Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
BP 1.8 / B6 1.6 horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
- NA 1996-97 BP-ZE: 133 hp @6500, 114 lb-ft @5500155 Nm
- B6-ZE 1.6 NA (1990-93): 116 hp @6500, 100 lb-ft @5500, 78 x 83.6 mm, 9.4:1, redline 720086 kW · 136 Nm
- NB 1999-2000 BP-4W: 140 hp @6500, 116-119 lb-ft @5000-5500, 9.5:1
- NB 2001-05 BP VVT: 142-143 hp (US), 146 PS UK
- Mazdaspeed MX-5 (turbo): 178 hp @6000, 166-167 lb-ft @4500, ~8.5 psi, limiter 6500
BP 1.8 / B6 1.6 firing order
BP 1.8 / B6 1.6 injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| DeatschWerks 440cc Injectors for NA/NB Miata · 18U-05-0440-49 | 440 cc/min maker listing (pressure basis not stated on product page) | Needs adapter USCAR-to-OEM plug adapter (check kit contents) |
| DeatschWerks 650cc Injectors for NA/NB Miata · 18U-05-0650-411 | 650 cc/min maker listing (pressure basis not stated on product page) | Needs adapter USCAR-to-OEM plug adapter (check kit contents) |
| Fuel Injector Clinic Mazda Miata MX5 NA/NB (High-Z) 445cc · IS601-0445H10 | 445 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec) | Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoD plug-and-play adapter (USCAR to Denso) |
| Fuel Injector Clinic Mazda Miata MX5 NA/NB (High-Z) 1000cc · IS601-1000H12 | 1000 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec) | Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoD plug-and-play adapter (USCAR to Denso) |
| Injector Dynamics ID1050-XDS (Miata 90-05) · 1050.11.02.60.11.4-PU3456 | 1065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec) | Needs adapter USCAR-to-OEM plug adapter (sold separately) unless -PU kit includes plugs (suffix meaning not stated) |
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Knock | Not yet sourcedResearched, unverified | Not yet sourced | No knock sensor part found for NA/NB |
| MAP | Not yet sourcedResearched, unverified | Not yet sourced | |
| MAF × 1 | B6S7-13-210A (1990-93 1.6)|FS1E-13-215 (NB listing)Cross-ref: Denso 197100-4090Sourced · medium8 | vane AFM (NA 1.6); hot-wire (NB) · 0-5 V analog | NA 1.6 vs NB splitVane meter includes IAT and fuel pump switch |
| O2 (upstream) × 1 | Not yet sourcedResearched, unverified | narrowband zirconia · 0-1 V |
Ignition and triggers
Tuning notes
Factory load sensing
The factory ECU measures load by a strategy that changes with year and market. NA 1.6 B6: vane-type air flow meter (Wikipedia). NA 1.8 (1994-97): conflicting (forum says hot-wire came with 1.8; parts listings label NA 1.8 unit 'MAF AFM'). NB (1999+): MAF per parts listing. O2 type inferred from era, not sourced.Low1 Conflict
Factory oxygen sensors
Upstream: narrowband (zirconia) (1). Downstream O2 sensors: varies.Low1 Conflict
Injector drive
Factory injector impedance: high (saturated) (forum). Connector: Sumitomo (Denso/Toyota) (FIC PADPUtoD4).Low76
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Rods/pistons commonly cited as first limit under boost; cooling under sustained track use also cited (forum, BOFI blog).Low12 Conflict
Valvetrain, factory engine management and weak points across every generation are on the Mazda B6 / BP guide.
Vehicles with the BP 1.8 / B6 1.6 (MX-5 NA / NB)
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
12 sources
- Factory ratings: mazda-b (E-745) · en.wikipedia.org · reference · retrieved 2026-10-25
- Mazda B engine (MX-5 NA/NB) (E-1103) · en.wikipedia.org · reference · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Fuel Injector Clinic catalogue (E-1295) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- Sensors/Mazda Miata VAF (E-1428) · miata.net · reference · retrieved 2026-10-25
- deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.

