Factory specification
Layout, dimensions and factory hardware, each with its source.
CONFLICT: Mahle cast eutectic (australiancar.reviews) vs commonly described hypereutectic
Sourced · medium4Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
5.7 Hemi horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
- 2003 Ram (non-VVT): 345 hp @5400, 375 lb-ft @4200, 9.6:1
- 2005 car: 340 hp, 390 lb-ft
- 2009 Ram: 390 hp, 407 lb-ft
- 2016 Challenger R/T auto: 372 hp @5200, 400 lb-ft @4400
- Manual: 375 hp @5150, 410 lb-ft @4300
5.7 Hemi firing order
The order the cylinders fire in, with the cylinder numbering the source states.
5.7 Hemi injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Fuel Injector Clinic (FIC) FIC 525cc High-Z injector set · IS156-0525H15 | 525 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS156-1000H15 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS153-1000HMedium14 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS153-1000H-SCMedium14 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
5.7 Hemi swap
Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position | Mopar 68140678AB -> 68477925ABSourced · medium8 | Not yet sourced | 2016 Challenger 5.7/6.2/6.4 |
| Cam position | Mopar 56041584AF (2002-07) | 5149054AA -> 5149054AC (2008+)Sourced · medium118 | Not yet sourced | Ram 1500 5.7; Challenger 5.7/6.1/6.2/6.4 |
| Knock × 2 | Mopar 56028563AA (2003-07) -> 5033316AA (2008-10) -> 5033316ABSourced · medium11108 | Not yet sourced | Ram 1500 5.7, Charger/Challenger 5.7/6.2/6.4 |
| MAP | Mopar 5033310AC (2007 Charger EZB; repl by 68199324AB) | 68199324AA -> AB (2016 EZC/EZH VVT) | 5149174AB (-> 68371847AB)Sourced · medium108 | Not yet sourced | |
| O2 (upstream) | Mopar 5149180AA (-> AB) | 5149171AA (-> AB)Low confidence9 | Not yet sourced | 2017 Challenger 3.6/5.7/6.4 (positions not stated) |
| Coolant temp | Mopar 5149077ABSourced · medium8 | Not yet sourced | 2016 Challenger EZC/EZH/ESG/ESH/ESD |
| Intake air temp | Mopar 5149182AB (air temperature sensor; label inferred)Low confidence8 | Not yet sourced | 2016 Challenger |
Ignition and triggers
Tuning notes
Factory load sensing
The factory ECU measures load by MAP speed-density. Forum: 5.7 Hemi has no MAF; MAP on intake manifold, speed-density PCM. Mopar crate kits include O2 sensors (type unspecified).Low23
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Low-quality sites put the stock bottom end at about 6-8 psi of boost, with the pistons and rods at risk beyond that.Medium4
Common first upgrades (reported)
Builders most often report upgrading: forged pistons and rods.Medium4
Valvetrain, factory engine management and weak points across every generation are on the Mopar Gen III Hemi guide.
Vehicles with the 5.7 Hemi (Eagle, VVT 2009+)
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
15 sources
- Factory ratings: Chrysler Gen III Hemi 5.7/6.1/6.4 (E-714) · media.stellantisnorthamerica.com · oem · retrieved 2026-10-25
- Chrysler Hemi load (E-814) · ramforum.com · community · retrieved 2026-10-25
- Mopar crate Hemi O2 (E-815) · carscoops.com · press · retrieved 2026-10-25
- Hemi 5.7/6.1/6.4 (E-1028) · embargoed.stellantisnorthamerica.com · reference · retrieved 2026-10-25
- Injector aftermarket fitment (E-1206) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- OEM injector (E-1215) · onallcylinders.com · press · retrieved 2026-10-25
- OEM injector (E-1228) · store.mopar.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Mopar 2016 Challenger (E-1335) · moparpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM O2 Mopar 2017 Challenger (E-1336) · moparpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Mopar 2007 Charger (E-1337) · moparpartsgiant.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Mopar Ram 1500 (E-1338) · moparpartsgiant.com · vendor-doc · retrieved 2026-10-25
- Firing order: Chrysler Gen III Hemi 5.7 / 6.4 (OEM) (E-4804) · manualslib.com · reference · retrieved 2026-10-28
- Firing order and numbering: Chrysler Gen III Hemi (E-4806) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.



