Factory specification
Layout, dimensions and factory hardware, each with its source.
- 4.6 4V: aluminiumTeksid, Italy, 1999 and earlier
- 2003-04 Cobra: cast iron
- 5.4 GT500 2007-10 iron, 2011+ aluminium
- Ford GT: 356-T6 aluminium
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
5.4 4V horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
- 1996-98 Cobra 4.6 4V NA: 305 hp, 300 lb-ft, 6800 redline/7000 fuel cut
- 1999 Cobra: 320 hp, 317 lb-ft
- 2003-04 Cobra 4.6 SC (Eaton M112, ~8 psi): 390 hp, 390 lb-ft
- 2005-06 Ford GT 5.4 SC (Lysholm screw): 550 hp @6500, 500 lb-ft @4500
- 2008-09 GT500KR & 2010 GT500: 540 hp, 510 lb-ft
- 2011-12 GT500: 550 hp, 510 lb-ft
- 2013-14 GT500 5.8 Trinity: 662 hp @6500, 631 lb-ft @4000, 9.0:1
5.4 4V firing order
5.4 4V injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS403-1000H18 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS404-1000H17 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Plug-in |
| Injector Dynamics ID1050-XDS (set) · 1050.60.14.14.85101214 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Plug-in |
| Injector Dynamics ID1050-XDS (set) · 1050.48.14.14.85101214 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Plug-in |
| Injector Dynamics ID1300-XDS (set) · 1300.48.14.14.86111315 | 1335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec) | Plug-in |
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position | Ford 1W7Z-6C315-ABSourced · medium16 | Not yet sourced | 2001-14 4.6 DOHC/5.4/5.8 |
| Cam position | Ford 1W7Z-6B288-ABSourced · medium16 | Not yet sourced | 2001-14 |
| Knock | Cobra 4.6 S/C: Ford F8CZ-12A699-AA | GT500 5.4: 1L2Z-12A699-AA / 4L3Z-12A699-AA (2007-10), 2R3Z-12A699-AA (2010), AL3Z-12A699-A (2011-14)Sourced · medium16 | Not yet sourced | Mustang Cobra 2003-04; Shelby GT500 2007-14 |
| MAP | Ford 2R3Z-9F479-AA (2002-04 4.6 DOHC S/C; -> AA5Z-9F479-E)Low confidence16 | Not yet sourced | Mustang CobraFunction of 9F479 on Cobra (MAP vs boost) not stated |
| MAF | Cobra: Ford 1L3Z-12B579-AA (2002-04) | GT500: 4G7Z-12B579-AB (2007-10), BR3Z-12B579-A (2011-14)Sourced · medium16 | Not yet sourced | |
| O2 (upstream) | Ford 5C5Z-9F472-AA (2005-10) | BR3Z-9F472-A (2011-14 4.6/5.4/5.8)Low confidence16 | Not yet sourced | GT500 |
Ignition and triggers
Tuning notes
Factory load sensing
No source found; 1996-2014 span crosses OBD-II and HEGO/UEGO eras. Researched, unverified
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
No sourced limit for these engines. The supercharged variants (2003-04 Cobra, GT500, Ford GT) got forged internals from the factory.Medium1234
Valvetrain, factory engine management and weak points across every generation are on the Ford Modular guide.
Vehicles with the 4.6 / 5.4 4V (Cobra, GT500, Boss 260/290)
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
18 sources
- Factory ratings: Ford Modular 4.6 2V (E-705) · en.wikipedia.org · reference · retrieved 2026-10-25
- Factory ratings: Ford Modular (4.6 3V, 4.6/5.4 4V) (E-706) · en.wikipedia.org · reference · retrieved 2026-10-25
- Ford Modular 2V/3V/4V/5.4 (E-1014) · en.wikipedia.org · reference · retrieved 2026-10-25
- Ford GT 5.4 block (E-1016) · performanceparts.ford.com · oem · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1205) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- OEM injector (E-1212) · onallcylinders.com · press · retrieved 2026-10-25
- OEM injector (E-1216) · performanceparts.ford.com · oem · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- OEM sensors Ford Mustang (E-1327) · fordpartsgiant.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.


