Nissan VR38DETT · 2007-

VR38DETT specs: horsepower, injectors and sensors

The VR38DETT (R35 GT-R) is a twin-turbo 3.8 L V6 engine from Nissan (2007-) with port fuel injection and coil-on-plug ignition. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low1151114

Power: 565 hp @ 6,800 rpm · Torque: 467 lb-ft (633 Nm) @ 3,300 rpm (Nissan rating, not a GAINS measurement)1

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2007-Catalog range across the variants on this page.Researched, unverified
Displacement3.8L3,799 cc from bore × strokeSourced1
LayoutV6Researched, unverified
Bore × stroke95.5 × 88.4mm3.76 × 3.48 inSourced1
Compression ratio9.0:1Sourced1
Redline7,100rpmSourced1
Aspirationtwin-turboResearched, unverified
Recommended fuel93 AKI premium unleadedSourced1
Fuel injectionport fuel injectionLow confidence151114
BlockaluminiumSourced · medium219
Cylinder liners

plasma-sprayed bore coating (~0.15 mm per Wikipedia; ~0.6 mm per MotoIQ) - cannot be overbored without sleeving

Sourced · medium219
Connecting rodsbig, heavy stock rodsCosworth via MotoIQSourced · medium219
Pistons

heavy cast "jam pot" style with oil-cooling gallery and hard-anodized top groove (Cosworth via MotoIQ)

Sourced · medium219

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

VR38DETT horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Nissan rating)565hp @ 6,800 rpmSAE net, US GT-R Premium 2017-2024; torque plateau 3300-5800 rpm; 7100 rpm = Nissan "max engine speed"; boost not publishedSourced1
Torque (Nissan rating)467 lb-ft @ 3,300 rpm633 NmSourced1
Other published ratings
  • 2009 US launch: 480 hp @6400, 430 lb-ft @3200-5200 (JDM 2007: 480 PS, 588 Nm)
  • 2012: 530 hp @6400, 448 lb-ft @3200-6000
  • 2013-16: 545 hp @6400, 463 lb-ft @3200-5800
  • NISMO (2015+/2020+): 600 hp @6800, 481 lb-ft @3600-5600, 93 AKI required
Sourced1

VR38DETT firing order

VR38DETT injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleTop-feed, high impedanceLow confidence151114
OEM part numbers
  • 16600-JF00A
  • 16600-38B0Bseller listings
Low confidence151114
ImpedancehighsaturatedLow confidence151114
Connector

R35-specific (ID sells USCAR-to-R35 adapters; FIC uses USCAR-to-Denso PADPUtoD6)

Low confidence151114
LengthotherLow confidence151114
FeedtopLow confidence151114

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks 750cc - GTR VR38DETT 2009-2015 · 17U-06-0750-620750 cc/min maker listing (pressure basis not stated on product page)Needs adapter USCAR-to-OEM plug adapter (check kit contents)
DeatschWerks 1000cc - 350z-370z, GTR VR38DETT 2009-15 (EV14) · 17U-06-1000-6221000 cc/min maker listing (pressure basis not stated on product page)Needs adapter USCAR-to-OEM plug adapter (check kit contents)
Fuel Injector Clinic Nissan R35 GT-R (High-Z) 1000cc · IS188-1000H211000 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec)Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoD plug-and-play adapter (USCAR to Denso)
Injector Dynamics ID1050-XDS (GTR (R35)) · 1050.48.14.R35.6369111065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter USCAR-to-R35 OEM connector adapter (ID electrical adapter sold separately)
Injector Dynamics ID1300-XDS (GTR (R35)) · 1300.48.14.R35.64710121335 cc/min 3.0 bar (43.5 psi), iso-octane, 52 C (maker spec)Needs adapter USCAR-to-R35 OEM connector adapter (ID electrical adapter sold separately)
Injector Dynamics ID2600-XDS (GTR (R35)) · 2600.48.14.R35.65810132600 cc/min 3.0 bar (43.5 psi) (maker spec; min 11 V supply)Needs adapter USCAR-to-R35 OEM connector adapter (ID electrical adapter sold separately)

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank position × 123731-JA10C (supersedes 23731-JA10B)Sourced · medium17crank position sensor · digital2014-2016 GT-R (partsouq)
Cam position23731-JA11B (supersedes 23731-JA11A)Sourced · medium17cam position sensor · digital2013-2019 GT-R pagesRetailer lists as crank/cam sensor
Knock × 222060-JK23BSourced · medium18piezo knock sensorGT-R among applications (Nissan parts site)Shared with VQ; confirm by VIN
MAPNot yet sourcedResearched, unverifiedNot yet sourcedBoost/MAP sensor not sourced
MAF × 2 (one per intake)Not yet sourcedResearched, unverifiedhot-filmPart number not sourced
O2 (upstream) × 2 (one per bank)22693-JF00A (passenger side)|22693-JF00B (driver side)Cross-ref: Denso 234-9071 (seller cross-ref)Sourced16wideband A/F sensor · current (A/F)2009-2017 GT-R (nissanpartsdeal)
O2 (downstream)226A0-EN21ASourced · medium16heated narrowband zirconia · 0-1 V2011 GT-RRetailer page labels position rear

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank triggercrank position sensor, digital2014-2016 GT-R (partsouq)Sourced · medium17
Cam sensorcam position sensor, digital2013-2019 GT-R pagesSourced · medium17
Valve timingdual CVTCResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (hot-wire / hot-film). No OEM service doc read. Nismo RB26 fuel kit uses 2 genuine R35 airflow meters (22680-7S00A); OEM part 22693-JF00A is catalogued as 'air fuel ratio sensor' (right upper). Downstream sensors and closed-loop range not confirmed. Researched, unverified

Factory oxygen sensors

Upstream: wideband A/F (UEGO) (2 (1 per bank)). Researched, unverified

Injector drive

Factory injector impedance: high (saturated). Connector: R35-specific (ID sells USCAR-to-R35 adapters; FIC uses USCAR-to-Denso PADPUtoD6).Low151114

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

Cosworth (via MotoIQ) warns heavy reciprocating mass loads bearings at high power and rpm.Medium219

Common first upgrades (reported)

Builders most often report upgrading: forged rods (Manley/Carrillo), forged pistons with skirt coating; sleeves for overbore (MotoIQ, DSPORT).Medium219

Valvetrain, factory engine management and weak points across every generation are on the Nissan VR38DETT guide.

Vehicles with the VR38DETT (R35 GT-R)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

22 sources
  1. Factory ratings: Nissan VR38DETT (E-737) · usa.nissannews.com · oem · retrieved 2026-10-25
  2. Nissan VR38DETT internals (E-1093) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  4. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1203) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injectors / ID2600-XDS fitment (E-1233) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  9. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  10. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injector Dynamics ID2600-XDS fitment table (E-1292) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. Fuel Injector Clinic catalogue (E-1295) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  15. VR38DETT OEM part numbers (E-1303) · ebay.de · vendor-doc · retrieved 2026-10-25
  16. Sensors/Nissan VR38 O2 (E-1410) · nissanpartsdeal.com · vendor-doc · retrieved 2026-10-25
  17. Sensors/Nissan VR38 crank cam (E-1411) · nissanpartsdeal.com · vendor-doc · retrieved 2026-10-25
  18. Sensors/Nissan VQ VR knock (E-1412) · parts.nissanusa.com · vendor-doc · retrieved 2026-10-25
  19. OEM turbo: nissan-vr38-ihi (E-10110) · en.wikipedia.org · reference · retrieved 2026-11-04
  20. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  21. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  22. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.