Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
Barra Turbo horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
Barra Turbo firing order
Barra Turbo injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS411-1000H16 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Needs adapter includes PGTUSC6 pigtails (SKU suffix) |
| Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS412-1000H17 | 1000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating) | Needs adapter includes PGTUSC6 pigtails (SKU suffix) |
| Injector Dynamics ID1050-XDS (set) · 1050.60.14.14B.6481012 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
| Injector Dynamics ID1050-XDS (set) · 1050.48.14.14B.6481012 | 1065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
| Injector Dynamics ID1300-XDS (set) · 1300.60.14.14B.6591113 | 1335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
| Injector Dynamics ID1300-XDS (set) · 1300.48.14.14B.6591113 | 1335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec) | Needs adapter USCAR-to-EV1 (Jetronic) plug adapters; maker page does not say whether the application kit includes them |
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Knock | Bosch 2-pin knock sensor (Bosch number not captured)Low confidence15 | Not yet sourced | BA/BF/FG XR6 |
| MAP | Ford AG9G-9F479-AA (FG turbo manifold TMAP, forum) | separate boost sensor on throttle-body elbowLow confidence14 | integrated MAP+IAT (TMAP) on manifold + separate boost pressure sensor | FG XR6 TurboForum source; Bosch 0 261 230 283 cited by an aftermarket listing as FG Barra manifold sensor |
Ignition and triggers
Tuning notes
Factory load sensing
Retail listing: Bosch MAP/T-MAP sensor in intake manifold 'used to determine engine load' on BA/BF/FG turbo; whether MAF is primary not established.Low213
Injector drive
Factory injector impedance: high (saturated). Connector: EV1 / Jetronic (inferred: FIC sets need pigtails except native-Jetronic 1200/1650 cc versions).Low746
Driver and calibration
High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Rods and rod bolts are commonly reported as the first limit. Australian press reports stock-bottom-end XR6T engines as unusually tough, with one engine making about 500 rwhp before failing.Medium13
Common first upgrades (reported)
Builders most often report upgrading: forged rods/pistons, billet crank for very high power, main studs/girdle (Street Machine, forum).Medium13
Valvetrain, factory engine management and weak points across every generation are on the Ford Barra guide.
Vehicles with the Barra 4.0 Turbo (XR6T / F6)
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
17 sources
- Factory ratings: Ford Barra 4.0 I6 (NA and turbo) (E-711) · en.wikipedia.org · reference · retrieved 2026-10-25
- Barra turbo load (E-817) · independentmotorsports.com.au · reference · retrieved 2026-10-25
- Barra 4.0 NA/Turbo (E-1025) · en.wikipedia.org · reference · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1205) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- OEM injector (E-1226) · fordmods.com · reference · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Barra FG turbo TMAP (E-1341) · fordxr6turbo.com · reference · retrieved 2026-10-25
- Barra knock/O2 marketplace (E-1342) · ebay.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.
Not yet indexed: fewer than 3 sensors.



