Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
13B Turbo horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
13B Turbo firing order
13B Turbo injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Direct-fit upgrades
Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.
| Injector | Flow | Fit |
|---|---|---|
| Injector Dynamics ID1050-XDS (RX-7 87-92 14mm) pair · 1050.11.06.60.14.246810 | 1065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec) | Needs adapter USCAR-to-OEM plug adapter (sold separately) |
| Injector Dynamics ID1300-XDS (RX-7 87-92 11mm) pair · 1300.11.03.60.11.257911 | 1335 cc/min 3.0 bar (43.5 psi), iso-octane, 52 C (maker spec) | Needs adapter USCAR-to-OEM plug adapter (sold separately) |
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Knock × 1 | Not yet sourcedResearched, unverified | piezo knock sensor | Not sourced |
| MAP | Not yet sourcedResearched, unverified | Not yet sourced | |
| MAF × 1 | Not yet sourcedLow confidence13 | vane AFM · 0-5 V analog | 197100-2480 RX-7 listing unverified |
| O2 (upstream) × 1 | Not yet sourcedResearched, unverified | narrowband zirconia · 0-1 V |
Ignition and triggers
Tuning notes
Factory load sensing
No acceptable source found that states FC airflow meter type. Researched, unverified
Known limits (reported)
Apex seal failure from detonation is the commonly reported first failure (Martiniworks, generic rotary).Low12314 Conflict
Valvetrain, factory engine management and weak points across every generation are on the Mazda rotary (13B / Renesis) guide.
Vehicles with the 13B-T / 13B (FC)
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
14 sources
- Factory ratings: mazda-rotary (E-744) · en.wikipedia.org · reference · retrieved 2026-10-25
- Mazda 13B rotary (FC/FD) (E-1101) · en.wikipedia.org · reference · retrieved 2026-10-25
- Mazda Renesis (E-1102) · en.wikipedia.org · reference · retrieved 2026-10-25
- Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
- Mazda rotary turbo injectors (E-1306) · forums.hybridz.org · community · retrieved 2026-10-25
- Sensors/Mazda FD knock (E-1427) · ebay.de · vendor-doc · retrieved 2026-10-25
- OEM turbo: mazda-rx7-hitachi-ht18 (E-10105) · en.wikipedia.org · reference · retrieved 2026-11-04
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.
Not yet indexed: fewer than 60% of facts sourced.

