Nissan VG30 · 1990-96

VG30DETT specs: horsepower, injectors and sensors

The VG30DE(TT) (Z32) is a twin-turbo 3.0 L V6 engine from Nissan (1990-96) with port fuel injection and coil-on-plug ignition. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low12987

Power: 300 hp @ 6,400 rpm · Torque: 283 lb-ft (384 Nm) @ 3,600 rpm (Nissan rating, not a GAINS measurement)Medium1

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1990-96Catalog range across the variants on this page.Researched, unverified
Displacement3.0L2,960 cc from bore × strokeSourced · medium1
LayoutV6Researched, unverified
Bore × stroke87 × 83mm3.43 × 3.27 inSourced · medium1
Compression ratio8.5:1Sourced · medium1
Aspirationtwin-turboResearched, unverified
Fuel injectionport fuel injectionLow confidence987
Blockcast ironSourced · medium13
Cylinder linersnoneiron blockSourced · medium13
Main capsfully girdle-supported main caps (MotoIQ)Sourced · medium13
Crankshaftforged steelMotoIQSourced · medium13
Connecting rodsforged steelMotoIQSourced · medium13
Pistonsoil-cooled by block-mounted sprayers (MotoIQ)Sourced · medium13

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

VG30DETT horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Nissan rating)300hp @ 6,400 rpmSAE net, US 1990-96 300ZX Twin Turbo manual (Wikipedia uncited + enthusiast reproduction of factory spec); bore/stroke/CR from JDM catalogue dataSourced · medium1
Torque (Nissan rating)283 lb-ft @ 3,600 rpm384 NmSourced · medium1
Other published ratings
  • US 300ZX TT automatic: 280 hp, 283 lb-ft @3600
  • JDM Fairlady Z twin turbo: 280 PS @6400 (some EU catalogues 268 hp/197 kW)
  • VG30DE (NA, Z32): 222 hp (US), 198 lb-ft
  • JDM VG30DE originally 185 PS
Sourced · medium1

VG30DETT firing order

VG30DETT injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleNissan/JECS side-feedLow confidence987
MakerJECSLow confidence987
Impedancehigh (saturated), 10-14 (forum) ΩLow confidence987
ConnectorJECS Nissan side-feedLow confidence987
LengthotherLow confidence987
FeedsideLow confidence987

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks 370cc - Nissan 300zx 90-99 (side feed) · 01J-00-0370-614370 cc/min maker listing (pressure basis not stated on product page)Plug-in
DeatschWerks 550cc - Nissan 300zx 90-96 (side feed) · 01J-00-0550-613550 cc/min maker listing (pressure basis not stated on product page)Plug-in
DeatschWerks 950cc - 300zx 90-96 (side feed) · 02J-01-0950-612950 cc/min maker listing (pressure basis not stated on product page)Plug-in
Injector Dynamics ID1050-XDS (300ZX TT 90-96 14mm) · 1050.60.14.14.6Medium45671065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter aftermarket top-feed fuel rail (OEM rail is side-feed) + USCAR plug adapter

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank position × 123731-45V10 (seller listing)Low confidence11optical CAS · digital (optical)300ZX 90-96Listing only
Knock22060-30P00Low confidence10piezo knock sensor300ZX (seller listings)
MAPNot yet sourcedResearched, unverifiedNot yet sourcedMAF-based
MAF × 2 (twin turbo)22680-30P00|22680-16V00 (alt OE in listing)Cross-ref: Mobiletron MA-NS031|Bosch-branded aftermarket (listing)Sourced · medium11hot-wire, analog 0-5 V · 0-5 V analog1990-96 300ZX TT
O2 (upstream)Not yet sourcedResearched, unverifiednarrowband zirconia · 0-1 VNot sourced

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank triggeroptical CAS, digitaloptical300ZX 90-96Low confidence11
Valve timingintake VTCResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (hot-wire / hot-film). 1990 Z32 FSM: air flow meter hot film, exhaust gas sensors (per bank), no rear. 1996 FSM: MAF hot film, front HO2S LH/RH + rear HO2S per bank (OBD-II).2

Factory oxygen sensors

Upstream: narrowband (zirconia) (2 (1 per bank)). Downstream O2 sensors: varies. Closed-loop fuelling: narrowband closed loop at stoich; open loop decel/accel, high load/high speed, (1996: also idle), cold/failed sensor (Nissan FSM).2

Injector drive

Factory injector impedance: high (saturated). Connector: JECS Nissan side-feed.Low987

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

MotoIQ notes thin cylinder walls (sonic-test beyond ~0.5 mm overbore) and core shift restricting coolant so rear cylinders run hot and detonate first.Medium13

Common first upgrades (reported)

Builders most often report upgrading: ARP main studs, coolant passage porting, align/torque-plate honing (MotoIQ build).Medium13

Valvetrain, factory engine management and weak points across every generation are on the Nissan VG30 guide.

Vehicles with the VG30DE(TT) (Z32)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

14 sources
  1. Factory ratings: Nissan VG family (VG30DETT/VG30DE Z32) (E-738) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Nissan VG30DETT Z32 fueling (E-844) · servicemanuals-backend.fly.storage.tigris.dev · service-manual · retrieved 2026-10-25
  3. Nissan VG30DETT internals (E-1094) · motoiq.com · press · retrieved 2026-10-25
  4. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. DeatschWerks injector catalogue (E-1294) · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  9. VG30DETT injector resistance (E-1302) · forums.nicoclub.com · community · retrieved 2026-10-25
  10. Sensors/Nissan knock 22060-30P00 and SR CAS (E-1418) · walmart.com · reference · retrieved 2026-10-25
  11. Sensors/Nissan VG30DETT (E-1420) · autodoc.co.uk · reference · retrieved 2026-10-25
  12. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  13. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  14. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.