Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
N54 horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
- 240 kW @5800, 450 Nm @1500-4500 (335is/740i/Z4 35is, BMW USA: 320 hp/332 lb-ft)322 hp · 332 lb-ft
- 250 kW (335 hp) @59001M Coupe
- Alpina 265/294/300 kW variants
- 225 kW version widely considered under-rated (C&D)
N54 firing order
N54 injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position × 1 | BMW 13627582842Cross-ref: VNE 13627582842Low confidence11 | crankshaft sensor | 135i, 335i, 535i |
| Cam position × 2 (intake, exhaust) | BMW 13627525014Cross-ref: Hitachi 13627525014Sourced · medium11 | Hall effect · digital | N20/N26/N51/N52/N54/N55/N63/S55/S63Same part either cam |
| Knock | BMW 13627566786Sourced · medium11 | piezo knock sensor | 1M, 135i, 335i, 535i (N54/N55)Also listed for N55 |
| MAP | BMW 13627585493 (replaces 13629797773, 13627551429)Sourced · medium1012 | boost pressure sensor (strain-gauge membrane) · approx 0.5-4.5 V output · 0-5 V analog | 135i/335i 2007-10 (N54)On charge pipe; also intake-air temp sensor in charge path |
| O2 (upstream) × 2 (one per bank) | BMW 11787558087 | Bosch 0 258 017 102Cross-ref: Bosch 17102Sourced · medium1311 | wideband A/F (Bosch LSU 4.9) · LSU 4.9 compatible: yes | 135i E82/E88, 335i E90/92/93 |
| O2 (downstream) × 2 | Not yet sourcedSourced · medium10 | narrowband (secondary, discontinuous characteristic) · 0-1 V | MSD80/81 |
| Intake air temp × 1 | Not yet sourcedSourced · medium10 | NTC thermistor (charge air) · 0-5 V analog |
Ignition and triggers
Tuning notes
Factory load sensing
The factory ECU measures load by MAP speed-density. BMW ST055 Air Management: "The N54 engine uses a virtual HFM", air mass calculated from speed, IAT, throttle position, manifold pressure etc. CONFLICT: ST055 IPO legend for MSD80 (E9x) lists an HFM, and ST613 says HFM digital on "all new NG6 engines". DME MSD80 (2006-08) then MSD81 (2008-).234
Factory oxygen sensors
Upstream: wideband A/F (planar broad-band, bank 1 / bank 2) (2 (1 per bank / turbo)). Downstream O2 sensors: yes. Closed-loop fuelling: wideband (continuous) primary control sensors; open-loop enrichment at high load not described.234
Driver and calibration
Low-impedance and direct injectors need a peak-and-hold or direct-injection driver. Any injector change also needs new flow and dead-time data in the calibration. Researched, unverified
Known limits (reported)
Stock rods (and pistons under detonation) are the parts most often reported as first to fail at high power; HPFP, injectors and wastegates are the common non-internal weaknesses.Medium5617
Common first upgrades (reported)
Builders most often report upgrading: fuel system (HPFP/port injection), charge pipe/intercooler, then rods.Medium5617
Valvetrain, factory engine management and weak points across every generation are on the BMW N54 guide.
Vehicles with the N54 3.0 TT
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
13 sources
- Factory ratings: BMW N5x (N54/N55) (E-755) · en.wikipedia.org · reference · retrieved 2026-10-25
- BMW N54 air metering (E-860) · archive.org · service-manual · retrieved 2026-10-25
- BMW DME by engine (E-861) · archive.org · service-manual · retrieved 2026-10-25
- BMW N54 O2 (E-862) · archive.org · service-manual · retrieved 2026-10-25
- BMW N54/NG6 internals (E-1060) · archive.org · service-manual · retrieved 2026-10-25
- BMW N55 internals (E-1061) · archive.org · service-manual · retrieved 2026-10-25
- BMW N54/N55/B58/M5x tuning limits (E-1068) · bmwtuning.co · reference · retrieved 2026-10-25
- Fuel Injector Clinic catalogue (Shopify product feed) (E-1265) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
- BMW N54 OEM injector (E-1271) · bimmerworld.com · vendor-doc · retrieved 2026-10-25
- Sensors (E-1386) · archive.org · service-manual · retrieved 2026-10-25
- Part numbers (E-1387) · fcpeuro.com · reference · retrieved 2026-10-25
- Part numbers (E-1388) · bimmerworld.com · vendor-doc · retrieved 2026-10-25
- Cross reference (E-1389) · superspares.com.au · vendor-doc · retrieved 2026-10-25
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.

