Mitsubishi 6G72 · 1991-99

6G72 specs: horsepower, injectors and sensors

The 6G72TT (3000GT VR-4) is a twin-turbo 3.0 L V6 engine from Mitsubishi (1991-99) with port fuel injection and wasted spark ignition. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low121819161512

Power: 320 hp @ 6,000 rpm · Torque: 315 lb-ft (427 Nm) @ 2,500 rpm (Mitsubishi rating, not a GAINS measurement)Medium1

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1991-99Catalog range across the variants on this page.Researched, unverified
Displacement3.0L2,972 cc from bore × strokeSourced · medium1
LayoutV6Researched, unverified
Bore × stroke91.1 × 76mm3.59 × 2.99 inSourced · medium1
Compression ratio8.0:1Sourced · medium1
Aspirationtwin-turbo, 9 psi factory boost0.62 barSourced · medium1
Fuel injectionport fuel injectionLow confidence161512
Main caps
  • 2-bolt mains 1990-93
  • 4-bolt mains 1994+Automotive Tech Info
Low confidence3
Pistonspressed-in wrist pins on stock pistons (3SX vendor)Low confidence3

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

6G72 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Mitsubishi rating)320hp @ 6,000 rpmUS 1994-99 VR-4 SAE net; boost = TD04-09B nominal per WikipediaSourced · medium1
Torque (Mitsubishi rating)315 lb-ft @ 2,500 rpm427 NmSourced · medium1
Other published ratings
  • US 1991-93: 300 hp @6000, 307-308 lb-ft @2500 (text vs table conflict)417 Nm
  • JDM GTO TT: 280 PS @6000
  • EU: 286 PS @6000, 407 Nm @3000 with TD04-13G ~13 psi
Sourced · medium1

6G72 firing order

6G72 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleTop-feed, low impedanceLow confidence161512
Impedancelowpeak and holdLow confidence161512
ConnectorJetronic/EV1-styleFIC PADPUtoJ6Low confidence161512
LengthotherLow confidence161512
FeedtopLow confidence161512

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
Fuel Injector Clinic Mitsubishi 3000GT (High-Z) 650cc · IS135-0650H21650 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec)Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoJ plug-and-play adapter (USCAR to Jetronic/EV1)
Fuel Injector Clinic Mitsubishi 3000GT (High-Z) 1000cc · IS135-1000H201000 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec)Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoJ plug-and-play adapter (USCAR to Jetronic/EV1)
Injector Dynamics ID1050-XDS (3000GT VR4) · 1050.60.11.D.64710121065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter USCAR-to-OEM plug adapter (sold separately); OEM low-Z driver/resistor considerations
Injector Dynamics ID1300-XDS (3000GT VR4) · 1300.60.11.D.65811131335 cc/min 3.0 bar (43.5 psi), iso-octane, 52 C (maker spec)Needs adapter USCAR-to-OEM plug adapter (sold separately); OEM low-Z driver/resistor considerations
Injector Dynamics ID2600-XDS (3000GT VR4) · 2600.60.11.D.66911142600 cc/min 3.0 bar (43.5 psi) (maker spec; min 11 V supply)Needs adapter USCAR-to-OEM plug adapter (sold separately); OEM low-Z driver/resistor considerations

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Knock × 1Not yet sourcedResearched, unverifiedpiezo knock sensorNot sourced
MAPNot yet sourcedResearched, unverifiedNot yet sourcedMAF-based
MAF × 1MD170165 (turbo 91-93)|MD183618 (turbo 94-99)Sourced · medium17Karman vortex, frequency · frequency91-93 vs 94-99 splitCommunity wiki table
O2 (upstream)Not yet sourcedResearched, unverifiednarrowband zirconia · 0-1 V

Ignition and triggers

Ignition systemwasted sparkResearched, unverified
Valve timingnoneResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (Karman vortex). stealth316 (enthusiast reference): Karman MAS MD183609 on 1994-98 3000GT, VR-4 units share flow calibration. Pre-1994 not covered; O2 count not sourced.Low21819

Injector drive

Factory injector impedance: low (peak and hold). Connector: Jetronic/EV1-style (FIC PADPUtoJ6).Low161512

Driver and calibration

Low-impedance and direct injectors need a peak-and-hold or direct-injection driver. Any injector change also needs new flow and dead-time data in the calibration. Researched, unverified

Common first upgrades (reported)

Builders most often report upgrading: forged pistons with floating pins, billet/forged H-beam rods (3SX, ATI).Low3

Valvetrain, factory engine management and weak points across every generation are on the Mitsubishi 6G72 guide.

Vehicles with the 6G72TT (3000GT VR-4)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

21 sources
  1. Factory ratings: mitsu-6g72 (E-743) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Mitsubishi 4G63 DSM / 6G72TT load sensing (E-849) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Mitsubishi 6G72TT internals (E-1100) · automotivetechinfo.com · reference · retrieved 2026-10-25
  4. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1203) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  9. Injectors / ID2600-XDS fitment (E-1233) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  10. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. Injector Dynamics ID2600-XDS fitment table (E-1292) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  15. Fuel Injector Clinic catalogue (E-1295) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  16. DW low-Z top-feed 3000GT / DSM (E-1311) · onefastshop.com · reference · retrieved 2026-10-25
  17. Sensors/Mitsubishi 6G72 MAF (E-1426) · 3swiki.org · reference · retrieved 2026-10-25
  18. Glossary batch 3: blow through (E-3169) · en.wikipedia.org · reference · retrieved 2026-10-27
  19. Sensor library: MAF hub (E-5517) · en.wikipedia.org · reference · retrieved 2026-11-04
  20. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  21. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.