Mitsubishi 4G63 · 1992-07

4G63T specs: horsepower, injectors and sensors

The 4G63T (Evo I-IX) is a turbocharged 2.0 L inline-4 engine from Mitsubishi (1992-07) with port fuel injection and wasted spark ignition. The factory ECU measures load by MAF. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low123242232202118191417

Power: 286 hp @ 6,500 rpm · Torque: 289 lb-ft (392 Nm) @ 3,500 rpm (Mitsubishi rating, not a GAINS measurement)Medium1232422

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1992-07Catalog range across the variants on this page.Researched, unverified
Displacement2.0L1,997 cc from bore × strokeSourced · medium1232422
Layoutinline-4Researched, unverified
Bore × stroke85 × 88mm3.35 × 3.46 inSourced · medium1232422
Compression ratio8.8:1Sourced · medium1232422
AspirationturbochargedResearched, unverified
Fuel injectionport fuel injectionLow confidence18191417
Blockcast ironSourced · medium45
Cylinder linersnoneiron blockSourced · medium45
Connecting rodsforged steel2003 US Evo, WikipediaSourced · medium45

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

4G63T horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Mitsubishi rating)286hp @ 6,500 rpmUS Evolution IX (2006) SAE net per Mitsubishi Motors North America release; compression from spec table republishing the releaseSourced · medium1232422
Torque (Mitsubishi rating)289 lb-ft @ 3,500 rpm392 NmSourced · medium1232422
Other published ratings
  • JDM Evo I: 250 PS @6000, 309 Nm @3000
  • Evo II: 260 PS, 309 Nm
  • Evo III: 270 PS @6250, 309 Nm @3000
  • Evo IV: 280 PS @6500, 353 Nm @3000
  • Evo V: 280 PS, 373 Nm @3000
  • Evo VI: 280 PS @6500, 373 Nm @3000
  • Evo VII: 280 PS, 383 Nm
  • Evo VIII JDM: 280 PS, 400 NmMR
  • Evo VIII US (2003-05): 271 hp @6500, 273 lb-ft @3500370 Nm
  • Evo IX JDM: 280 PS advertised, 392-407 Nm by trim
Sourced · medium1232422

4G63T firing order

4G63T injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleTop-feed, low-impedance with resistor pack (Evo 8/9)Low confidence18191417
MakerDensonot confirmedLow confidence18191417
Impedancelowpeak and holdLow confidence18191417
ConnectorJetronic/EV1-styleFIC PADPUtoJ4Low confidence18191417
LengthotherLow confidence18191417
FeedtopLow confidence18191417

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks 800cc - EVO 8/9 4G63T 03-06 (high impedance) · 18U-08-0800-425800 cc/min maker listing (pressure basis not stated on product page)Needs adapter USCAR-to-OEM plug adapter; resistor pack bypass
DeatschWerks 1500cc - EVO 8/9 4G63T (EV14, high impedance) · 16M-09-1500-4261500 cc/min maker listing (pressure basis not stated on product page)Needs adapter resistor pack bypass
Fuel Injector Clinic Mitsubishi DSM or EVO 8/9 (High-Z) 1000cc · IS126-1000H181000 cc/min 3.0 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker spec)Needs adapter solder-in USCAR pigtails included, or optional FIC PADPUtoJ plug-and-play adapter (USCAR to Jetronic/EV1); resistor pack removal recommended
Injector Dynamics ID1050-XDS (Evo III - IX) · 1050.60.11.D.46912141065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter USCAR-to-OEM plug adapter (sold separately); OEM low-Z resistor pack bypass
Injector Dynamics ID1300-XDS (Evo III - IX) · 1300.60.11.D.471013151335 cc/min 3.0 bar (43.5 psi), iso-octane, 52 C (maker spec)Needs adapter USCAR-to-OEM plug adapter (sold separately); OEM low-Z resistor pack bypass
Injector Dynamics ID2600-XDS (Evo III - IX) · 2600.60.11.D.481113162600 cc/min 3.0 bar (43.5 psi) (maker spec; min 11 V supply)Needs adapter USCAR-to-OEM plug adapter (sold separately); OEM low-Z resistor pack bypass

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Knock × 1Not yet sourcedResearched, unverifiedpiezo knock sensorNot sourced
MAPNot yet sourcedResearched, unverifiedNot yet sourcedFuelling via Karman vortex MAF; boost sensor fitment not sourced
MAF × 1Not yet sourcedResearched, unverifiedKarman vortex, frequency (integrated IAT and baro) · frequencyType per Mitsubishi family; MD336482/E5T08071 listings do not cover 4G63T
O2 (upstream) × 1Not yet sourcedResearched, unverifiednarrowband zirconia · 0-1 V

Ignition and triggers

Ignition systemwasted sparkResearched, unverified
Valve timingMIVECEvo IXResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF (Karman vortex). MotoIQ Evo IX project: Karman airflow meter (reed/IR, frequency output). Evo IX supplement reportedly added IAT and boost sensor, but the OEM file was not retrievable (404). Evo I-VIII not individually sourced; O2 configuration not sourced.Medium322021

Injector drive

Factory injector impedance: low (peak and hold). Connector: Jetronic/EV1-style (FIC PADPUtoJ4).Low18191417

Driver and calibration

Low-impedance and direct injectors need a peak-and-hold or direct-injection driver. Any injector change also needs new flow and dead-time data in the calibration. Researched, unverified

Valvetrain, factory engine management and weak points across every generation are on the Mitsubishi 4G63 guide.

Vehicles with the 4G63T (Evo I-IX)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

26 sources
  1. Factory ratings: mitsu-4g63 (E-741) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Mitsubishi 4G63 DSM / 6G72TT load sensing (E-849) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Mitsubishi 4G63 Evo load sensing (E-850) · motoiq.com · press · retrieved 2026-10-25
  4. Mitsubishi 4G63 internals (E-1098) · en.wikipedia.org · reference · retrieved 2026-10-25
  5. Mitsubishi 4B11T internals (E-1099) · en.wikipedia.org · reference · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injector aftermarket fitment (E-1203) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  9. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  10. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injectors / ID2600-XDS fitment (E-1233) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  15. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  16. Injector Dynamics ID2600-XDS fitment table (E-1292) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  17. DeatschWerks injector catalogue (E-1294) · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  18. FIC DSM/Evo resistor pack (E-1296) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  19. 4G63 low impedance + resistor (E-1310) · dsmtuners.com · reference · retrieved 2026-10-25
  20. Glossary batch 3: blow through (E-3169) · en.wikipedia.org · reference · retrieved 2026-10-27
  21. Sensor library: MAF hub (E-5517) · en.wikipedia.org · reference · retrieved 2026-11-04
  22. OEM turbo: mitsubishi-td04 (E-10002) · en.wikipedia.org · reference · retrieved 2026-11-04
  23. OEM turbo: mitsubishi-td05 (E-10017) · en.wikipedia.org · reference · retrieved 2026-11-04
  24. OEM turbo: mitsubishi-td05hr-evo (E-10030) · en.wikipedia.org · reference · retrieved 2026-11-04
  25. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  26. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.