Factory specification
Layout, dimensions and factory hardware, each with its source.
Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.
1.8 G60 supercharged horsepower and torque
Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.
1.8 G60 supercharged firing order
1.8 G60 supercharged injectors
The factory injector, then direct-fit upgrades the makers list for this engine.
Factory injector
Sensors
Factory sensors by role: part numbers, signal type and fitment years.
| Sensor | OEM part numbers | Type / signal | Years and markets |
|---|---|---|---|
| Crank position × 1 | Not yet sourcedSourced5 | Hall sender in distributor (no separate crank sensor) · edges at 78 and 6 deg BTDC per cylinder · digital square wave | G60 DigifantSpeed and reference come from distributor; engine will not run without Hall signal |
| Knock × 1 | Not yet sourcedSourced5 | piezo, integrated steel sleeve · 3-4 V max; 7-12 kHz band · AC voltage | G60 DigifantSignal loss: no injection above approx 1 bar load |
| MAP × 1 | Not yet sourcedSourced5 | piezoresistive absolute pressure sensor, integrated in ECU (hose to manifold) · approx 0-2 bar absolute · internal | G60 Digifant |
| O2 (upstream) × 1 | Not yet sourcedSourced5 | narrowband zirconia, heated · 100-1000 mV · 0-1 V | G60 Digifant (catalyst) |
| Coolant temp × 1 | Not yet sourcedSourced5 | NTC thermistor · resistance | G60 Digifant |
| Intake air temp × 1 | Not yet sourcedSourced5 | NTC thermistor combined with CO potentiometer (G42 / G74) · used -24 to 100 C; CO pot 0-2 kOhm · resistance | G60 Digifant |
| Throttle position × 2 switches | Not yet sourcedSourced5 | idle and full-load switches (no potentiometer) · switch to ground | G60 DigifantFull-load enrichment from 2250 rpm |
Ignition and triggers
Hall sender in distributor (no separate crank sensor), edges at 78 and 6 deg BTDC per cylinder, digital square wave
G60 DigifantSourced5Tuning notes
Factory load sensing
The factory ECU measures load by MAP (absolute pressure sensor integrated in ECU, 0-2 bar abs). Bosch / VW Digifant integrates mixture, ignition, overrun cut-off, idle stabilisation and boost limiting; Hall sender in distributor gives speed; knock control; CO pot for base mixture. Lambda on catalyst versions.5
Factory oxygen sensors
Upstream: narrowband zirconia, heated (100-1000 mV) (1). Downstream O2 sensors: no. Closed-loop fuelling: yes.5
Valvetrain, factory engine management and weak points across every generation are on the VW EA827 (8v, 16v, G60, AP) guide.
Vehicles with the 1.8 G60 supercharged (PG; Golf Mk2 G60, Corrado G60, Passat G60)
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Factory ratings: vag-vr6 (E-751) · en.wikipedia.org · reference · retrieved 2026-10-25
- Vag-g60 ratings (E-16166) · en.wikipedia.org · reference · retrieved 2026-11-04
- Vag-ea827 16v (E-16167) · en.wikipedia.org · reference · retrieved 2026-11-04
- Vag-g60 volumes (E-16168) · en.wikipedia.org · reference · retrieved 2026-11-04
- Vag-g60 management/sensors/injectors (E-16169) · volkspage.net · reference · retrieved 2026-11-04
- VW EA827 8v (1.6 / 1.8 / 2.0) incl. Brazilian AP (E-16505) · en.wikipedia.org · reference · retrieved 2026-11-04
Evidence ids (E-…) refer to our research register; each records the source, date and confidence.

