Mazda rotary (13B / Renesis) · 1992-02

13B Rew specs: horsepower, injectors and sensors

The 13B-REW (FD) is a twin-turbo 1.3 L 2-rotor rotary engine from Mazda (1992-02) with port fuel injection and wasted spark ignition. The factory ECU measures load by MAP speed-density. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Low131012

Power: 255 hp @ 6,500 rpm · Torque: 217 lb-ft (294 Nm) @ 5,000 rpm (Mazda rating, not a GAINS measurement)Low12315

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years1992-02Catalog range across the variants on this page.Researched, unverified
Displacement1.3LResearched, unverified
Layout2-rotor rotaryResearched, unverified
Compression ratio9.0:1Conflict12315
Redline8,000rpmConflict12315
Aspirationtwin-turbo, 10 psi factory boost0.69 barConflict12315
Fuel injectionport fuel injectionLow confidence131012
Blockrotary: rotor housings with chrome-surfaced trochoid (MotoIQ)Conflict12315
Cylinder linersn/arotaryConflict12315
Crankshafteccentric shaftnot sourcedConflict12315
Connecting rodsn/arotaryConflict12315
Pistons
  • Rotors (lightened in build) with apex/corner/side seals
  • OEM apex seal design not sourced
Conflict12315
Head fastenerstension boltsConflict12315

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

13B Rew horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Mazda rating)255hp @ 6,500 rpmUS 1993-95 RX-7 SAE net; rotary (2 x 654 cc, 105 mm generating radius, 15 mm eccentricity, 80 mm rotor depth) so bore/stroke n/a; sequential twins ~10 psi from 1800 rpm, dip to ~8 psi at transition; compression/redline from secondary spec tableConflict12315
Torque (Mazda rating)217 lb-ft @ 5,000 rpm294 NmConflict12315
Other published ratings
  • JDM 1992-95: 255 PS
  • JDM 1996-98: 265 PS
  • JDM 1999-2002: 280 PSType RS: 280 PS @6500, 314 Nm @5000
  • Some sources state 252 hp for US (conversion of 255 PS)
Conflict12315

13B Rew firing order

13B Rew injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

Style
  • Primaries: top-feed
  • Secondaries: SIDE-feed
Low confidence131012
MakerNippondensonot confirmedLow confidence131012
LengthotherLow confidence131012
Feedtop (primary) / sidesecondaryLow confidence131012

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
DeatschWerks 1000cc and 2400cc - FD RX7 (2 + 2) · 16U-17-1024-4Medium16not stated maker listing (pressure basis not stated on product page)Needs adapter USCAR plug adapter; top-feed secondary rail (inferred)
DeatschWerks 1000cc - Mazda RX-7 1993-2002 (set of 4) · 16U-17-1000-4Medium181000 cc/min maker listing (pressure basis not stated on product page)Needs adapter USCAR plug adapter; top-feed secondary rail if OEM side-feed secondaries retained (inferred)
DeatschWerks 1500cc - Mazda RX-7 1993-2002 (set of 4) · 16M-17-1500-4Medium171500 cc/min maker listing (pressure basis not stated on product page)Needs adapter plug adapter; top-feed secondary rail (inferred)
Injector Dynamics ID1050-XDS (RX-7 93-95 14mm) pair · 1050.11.06.60.14.2468101065 cc/min 3.0 bar (43.5 psi), gasoline, 52 C (maker spec)Needs adapter USCAR-to-OEM plug adapter (sold separately)
Injector Dynamics ID1300-XDS (RX-7 93-95 11mm) pair · 1300.11.03.60.11.2579111335 cc/min 3.0 bar (43.5 psi), iso-octane, 52 C (maker spec)Needs adapter USCAR-to-OEM plug adapter (sold separately)

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank position × 2Not yet sourcedResearched, unverifiedeccentric shaft pickups · VR ACCount per rotary practice
Knock × 1N3A1-18-921|N3A1-18-921ACross-ref: Interchange 158-1105|S8752 (listing)Low confidence14piezo knock sensor1993-95 RX-7 (listing)
MAPNot yet sourcedResearched, unverifiedpressure sensor · 0-5 V analogNot sourced
MAFNot yet sourcedLow confidence14Not yet sourcedNo FD air flow meter number confirmed
O2 (upstream) × 1Not yet sourcedResearched, unverifiednarrowband zirconia · 0-1 V

Ignition and triggers

Ignition systemwasted sparkResearched, unverified
Crank triggereccentric shaft pickups, VR ACResearched, unverified
Valve timingrotarysequential twinsResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAP speed-density. Spec sheet lists 'D-Jetronic' (pressure-based) induction; a claimed alpha-N region at low throttle is unsourced (tuner forum only, excluded). No OEM doc read. Researched, unverified

Known limits (reported)

Apex seals commonly reported as first failure, usually as a symptom of detonation/lean (Martiniworks); stock corner seals limited at high power (MotoIQ).Low12315 Conflict

Common first upgrades (reported)

Builders most often report upgrading: 2 mm 2-piece metallic apex seals, solid corner seals, Mazda Competition rotor bearings, tension studs (MotoIQ).Low12315 Conflict

Valvetrain, factory engine management and weak points across every generation are on the Mazda rotary (13B / Renesis) guide.

Vehicles with the 13B-REW (FD)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

18 sources
  1. Factory ratings: mazda-rotary (E-744) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Mazda 13B rotary (FC/FD) (E-1101) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Mazda Renesis (E-1102) · en.wikipedia.org · reference · retrieved 2026-10-25
  4. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  9. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  10. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  11. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. DeatschWerks injector catalogue (E-1294) · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  13. Mazda rotary turbo injectors (E-1306) · forums.hybridz.org · community · retrieved 2026-10-25
  14. Sensors/Mazda FD knock (E-1427) · ebay.de · vendor-doc · retrieved 2026-10-25
  15. OEM turbo: mazda-rx7-hitachi-ht18 (E-10105) · en.wikipedia.org · reference · retrieved 2026-11-04
  16. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  17. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25
  18. deatschwerks.com product listing · deatschwerks.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.