Honda K-series · 2015-

K20C1 specs: horsepower, injectors, swaps and sensors

The K20C1 2.0T (Type R FK8 / FL5) is a turbocharged 2.0 L inline-4 engine from Honda (2015-) with direct injection and coil-on-plug ignition. The factory ECU measures load by MAF+MAP. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Medium12

Power: 315 hp @ 6,500 rpm · Torque: 310 lb-ft (420 Nm) @ 2,600 rpm (Honda rating, not a GAINS measurement)12

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2015-Catalog range across the variants on this page.Researched, unverified
Displacement2.0L1,996 cc from bore × strokeSourced12
Layoutinline-4Researched, unverified
Bore × stroke86 × 85.9mm3.39 × 3.38 inSourced12
Compression ratio9.8:1Sourced12
Redline7,000rpmSourced12
Aspirationturbocharged, 25.2 psi factory boost1.74 barSourced12
Recommended fuel91 AKI premium recommendedSourced12
Fuel injectiondirect injectionResearched, unverified
Blockaluminiumdie-castSourced · medium32
Cylinder liners
  • Cast iron sleeves
  • Plateau-honed
Sourced · medium32
Crankshaftforged steel, lightweight, micropolished journalsSourced · medium32
Connecting rodsforged steelSourced · medium32
Pistons

aluminium, cavity crowns, moly dot-pattern skirt coating, ion-plated rings

Sourced · medium32

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

K20C1 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (Honda rating)315hp @ 6,500 rpmSAE net, 2023 Civic Type R (FL5) Honda spec sheet; torque plateau 2600-4000 (same sheet footnote says 2500-4500)Sourced12
Torque (Honda rating)310 lb-ft @ 2,600 rpm420 NmSourced12
Other published ratings
  • FK8 (2017-21 US): 306 hp @6500, 295 lb-ft @2500-4500 (Honda press kit)
  • FK2 EU (2015-17): 310 PS
  • Jalopnik reports FL5 max boost 23.3 psi vs Honda 25.2 psi
Sourced12

K20C1 firing order

K20C1 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleGDIdirect injection, solenoidResearched, unverified
LengthotherResearched, unverified

K20C1 swap

Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.

K-Swap Acura Integra DC2 (1994-2001)A K-swap Integra DC2 is a common, kit-supported swap: the 1994-2001 Integra shares its K-series mount kit with the EG Civic and Del Sol.Honda K-series swap · difficulty 2/5CRX K Swap and Civic EF (1988-91)A CRX K swap, or a K swap in the 1988-91 EF Civic, is a well-supported swap, with bolt-in mounts, axles, shifters and conversion harnesses made for the 1988-91 chassis.Honda K-series swap · difficulty 3/5K Swap EG Civic (1992-95)A K-swap EG Civic is one of the most common Honda engine swaps, backed by bolt-in mounts, axles, shifters and hoses made for the 1992-95 chassis.Honda K-series swap · difficulty 2/5K Swap EK Civic (1996-2000)A K-swap EK Civic is a common, well-supported Honda swap, but the popular mount kit needs the 1996-2000 car's front subframe, steering rack and lower arms replaced with EG or DC2 Integra parts.Honda K-series swap · difficulty 3/5Honda Fit K-Swap (GD, GE, GK 2007-2020)A K-swap Honda Fit is a well-supported transverse swap: Hasport makes bolt-in mounts for the GD, GE and GK, and Fit-specific axles, shifter cables and jumper harnesses exist.Honda K-series swap · difficulty 4/5K-Swap Mazda Miata NA (1990-97)A K-swap Miata is a well-established swap with complete kits that turn a transverse Honda K-series into a longitudinal, rear-drive layout in the 1990-97 NA.Honda K-series swap · difficulty 3/5Mini Cooper K-Swap (R50/R53 2002-06, R56 2007-13)A Mini Cooper K-swap is a niche but kit-supported transverse swap: RPT Creations sells billet mount kits with a tucked harness for the 2002-06 R50/R53 and the 2007-13 R55-R59.Honda K-series swap · difficulty 4/5Subaru BRZ / Scion FR-S / Toyota 86 K Swap (2013-2020)A K swap BRZ, FR-S or 86 is a growing swap with one complete kit: KPower's K24 package keeps the factory 6-speed through a thick adapter plate, moves the engine low and back, and plugs into the chassis harness.Honda K-series swap · difficulty 3/5Toyota MR2 K Swap (Spyder 2000-07 and SW20 1991-99)A K swap MR2 is a well-supported Spyder (2000-05 US) swap and a smaller, kit-based SW20 one.Honda K-series swap · difficulty 3/5K24 + BMW M DCT swap guideA K24 with a BMW M DCT (Getrag GS7D36SG) in an S2000 is a proven but advanced swap, best known from time-attack cars.Honda K-series swap · difficulty 4/5

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank positionHonda 37500-RPY-G01Sourced4crank position sensorUS 2017+ Civic Type R
KnockHonda 30530-RPY-G01Sourced4knock sensorUS Civic Type R FK8 (2017 page, KA 6MT)FL5 not checked.
MAP × 2 PNsHonda 37830-RPY-G12 (replaces -G11) MAP & TA | Honda 37830-RPY-G01 MAPSourced4MAP + temperature (catalogue 'Sensor Assembly, MAP & TA') plus a second MAP sensorUS 2017+ Civic Type RLocations of the two sensors (manifold vs boost) not stated in catalogue.
MAFHonda 37980-RPY-G01Sourced4air flow meter (catalogue 'Meter, Air Flow')US 2017+ Civic Type RSensing technology not stated.
O2 (upstream)Honda 36531-RPY-G01 (replaced by 36531-RPY-G02)Sourced4wideband air-fuel ratio sensor (catalogue 'Sensor, LAF')US 2017+ Civic Type R
O2 (downstream)Honda 36532-5BF-A01Sourced4oxygen sensor (lower)US 2017+ Civic Type R

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank triggercrank position sensorUS 2017+ Civic Type RSourced4
Valve timingVTEC (exhaust) + VTCResearched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF+MAP (blended / torque model). 2017 CTR press: DI, sensors monitor exhaust air-fuel ratio. MAF in airbox per Mishimoto engineering blog (intake parts maker; low). Family K20C2 press lists intake airflow volume + intake manifold pressure + exhaust A/F, so MAF+MAP inferred for K20C1. Researched, unverified

Factory oxygen sensors

Upstream: wideband A/F upstream (press: exhaust air-fuel ratio monitored) (1). Downstream O2 sensors: yes. Closed-loop fuelling: A/F closed loop at part load; open loop/component-protection enrichment at high boost (generic). Researched, unverified

Common first upgrades (reported)

Builders most often report upgrading: forged rods and pistons on stock crank (e.g. mountune long block retains Honda crank).Medium32

Valvetrain, factory engine management and weak points across every generation are on the Honda K-series guide.

Vehicles with the K20C1 2.0T (Type R FK8 / FL5)

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Factory ratings: Honda K20C1 2.0T (E-721) · hondanews.com · oem · retrieved 2026-10-25
  2. Honda K-series internals (E-1035) · en.wikipedia.org · reference · retrieved 2026-10-25
  3. Honda K20C1 internals (E-1037) · gardnerweb.com · press · retrieved 2026-10-25
  4. OEM sensor PNs (Honda Civic 2017) (E-1357) · hondapartsnow.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.

Not yet indexed: fewer than 5 sources.